Woodmax OC 14.50, Class D4

One-component adhesive based on modified poly (vinyl acetate) dispersion of D4 water resistance class according to the Standard PN-EN 204. Joint after attaining full strength demonstrates good adhesion to wooden surfaces subjected to static and dynamic loads and demonstrates a good initial grab. The adhesive is certified by Institut für Fenstertechnik in Rosenheim, Germany, to confirm D4 class according to the Standard PN-EN 204 and high thermal resistance ≥ 7 N/mm2 according to the Standard EN14257 (WATT’91)

Application:

  • bonding of solid wood during manufacturing of woodworks
  • bonding of soft wood
  • bonding of tough wood
  • bonding of floor panels
  • bonding of chipboard or fibreboard
  • bonding of plywood
  • bonding of other wood-based materials
  • intended for use on cold presses and for hand working
  • intended for use on hot presses for bonding of veneer or laminates with chipboard or MDF blindfloor
  • internal components exposed to moisture, external parts with proper surface protection
  • not recommended for external parts exposed to excessive moisture such as garden furniture, etc.
  • Specifications
  • Tips

Viscosity

low

pH

not causing wood discolouration

MTTF

ca. 6 [°C]

Durability after 25 minutes

4 and above [MPa]

Joint

transparent, non-dulling and resistant to ageing

Adhesive application

Stir the adhesive thoroughly before use. It can be applied on one or both surfaces with a brush, putty knife, feeding vessel, applicator, hand roller.

Material safety data sheets are available exclusively at customers’ request through e-mail – fill in the form

 

 

Woodmax TC 24.50, Class D4

Two component adhesive based on the modified vinyl polyacetate dispersion, with water resistance class D4 according to PN-EN 204. The joint, after achieving full strength, offers very good adhesion to wooden surfaces subjected to static and dynamic load and ensures good initial adhesion.

The adhesive has been certified by IFT of Rosenheim, acknowledging the D4 class according to PN-EN 204, and high thermal resistance: ≥ 7 N/mm2 according to EN 14257 (WATT`91).

Applications:

  • bonding solid wood for production of interior joinery
  • bonding soft wood
  • bonding hard wood
  • bonding floor panels
  • bonding particleboards and fibreboards
  • bonding plywood
  • bonding other wood-based material
  • for use in cold press and manual bonding
  • for use in hot press, for bonding veneer and laminate to particle boards and MDF
  • Specifications
  • Tips

Viscosity

high

pH

not causing wood discolouration

MTTF

ca. 9 [°C]

Durability after 25 minutes

>3 (MPa)

Joint

transparent, non-dulling and resistant to ageing

Directions for use

Stir the adhesive thoroughly before use. It can be applied on one or both surfaces with a brush, putty knife, feeding vessel, applicator, hand roller.

Material safety data sheets are available exclusively at customers’ request through e-mail – fill in the form

 

Woodmax WR 13.50M, Class D3

One-component polyvinyl-acetate (PVA) modified dispersion D3 waterproof (PN-EN 204) adhesive.Very high bond strength to wood substrates subject to static and dynamic loads and excellent initial adhesion.

IFT Rosenheim and Wood Technology Institute in Poznań certified and D3 waterproof (as per PN-EN 204).

Applications:

  • bonding solid wood for production of interior joinery
  • bonding soft wood
  • bonding hard wood
  • bonding window joinery bonding floor panels
  • bonding particle and fibreboard, plywood,
  • bonding other wood-based material intended for use in cold press or manual bonding
  • intended for use in hot press for bonding
  • veneer and laminates to particle and MDF boards
  • Specifications
  • Tips

Viscosity

high

pH

not causing wood discolouration

MTTF

ca. 6 [°C]

Durability after 25 minutes

min 4 [MPa]

Joint

transparent, non-dulling and resistant to ageing.

Directions for use 

Mix thoroughly before use. Apply on one or both surfaces with a brush, spatula, roller, dispensing nozzle, dispensing gun or automatic dispenser (nozzle or roller). 

Material safety data sheets are available exclusively at customers’ request through e-mail – fill in the form

 

Woodmax SW 12.47, Class D2

One-component water-based polyvinyl acetate (PVA) adhesive with performance additives. High durability in short time and excellent bond strength to wood substrates. D2 waterproof joint as per PN-EN 204

Applications:

  • bonding hard wood
  • bonding soft wood
  • tongue and groove joints
  • bonding plywood
  • bonding other wood-based materials
  • intended for use in hot press
  • for use in cold press and manual bonding
  • Specifications
  • Tips

Viscosity

high

pH

not causing wood discolouration

MTTF

ca. 8 (°C)

Durability after 25 minutes

min 3 [MPa]

Joint

transparent, flexible, non-dulling and resistant to ageing.

Directions for use 
Mix thoroughly before use. Apply on one or both surfaces with a brush, spatula, roller, dispensing nozzle, dispensing gun or automatic dispenser (nozzle or roller). 

Material safety data sheets are available exclusively at customers’ request through e-mail – fill in the form

 

Woodmax W 11.45, Class D1

One-component polyvinyl-acetate (PVA) modified dispersion D1 waterproof (PN-EN 204) adhesive. High bond strength to wood substrates subject to static and dynamic loads and excellent initial adhesion.

Applications:

  • particleboard and fibreboard
  • other wood-based materials
  • dowels and mouldings
  • cold press and manual bonding
  • long open time
  • upholstered furniture frames
  • softwood
  • component assembly (dowel joints)
  • finger joints
  • Specifications
  • Tips

Viscosity

high

pH

not causing wood discolouration

MTTF

ca. 0 [°C]

Directions for use

Mix thoroughly before use. Apply on one or both surfaces with a brush, spatula, roller, dispensing nozzle, dispensing gun or automatic dispenser (nozzle or roller). 
 

Material safety data sheets are available exclusively at customers’ request through e-mail – fill in the form

 

Woodmax WK 2, Class D2

One-component adhesive based on poly (vinyl acetate) and additives. Joint after short time reaches good strength parameters and demonstrates good adherence to wooden
surfaces.

Joint fulfills the requirements of water resistance in class D2 according to the Standard PN-EN 204.

Application:

  • bonding of chipboard and fibreboard
  • bonding of other wood-based materials
  • intended for use on cold presses or for hand working
  • Specifications
  • Tips

Viscosity

low

pH

not causing wood discolouration

MTTF

ca. 5 [°C]

Density

ca. 1,05 g / cm3

Joint

transparent, non-dulling and resistant to ageing

Adhesive application

Stir the adhesive thoroughly before use. It can be applied on one or both surfaces with a inserting machine, feeding vessel, applicator, brush. Bonded surface should be evenly coated with adhesive.

Material safety data sheets are available exclusively at customers’ request through e-mail – fill in the form

Woodmax P 11.551, Class D1

One-component water-based polyvinyl acetate (PVA) adhesive with performance additives for flexible joints. High bond strength to wood, wood based and plastic substrates.

Applications:

  • paper
  • cardboard
  • packaging
  • paper/wood
  • textile/wood
  • solid wood, particleboard, fibreboard and other wood based materials in flexible joints subject to moderate static and dynamic loads
  • cold press and manual bonding
  • Specifications
  • Tips

Viscosity

high

pH

not causing wood discolouration

MTTF

ca. 0 [°C]

Joint

transparent, non-dulling and resistant to ageing

Directions for use

Mix thoroughly before use. Apply on one or both surfaces with a brush, spatula, roller, dispensing nozzle, dispensing gun or automatic dispenser (nozzle or roller). 

Material safety data sheets are available exclusively at customers’ request through e-mail – fill in the form

 

Woodmax P 11.583, Class D1

One-component adhesive based on poly (vinyl acetate) and additives, intended for obtaining of highly elastic joints. Joint after attaining full strength demonstrates good adhesion to paper surfaces and moderate to surfaces made of wood, woodbased materials or plastics.

Application:

  • bonding of paper 
  • bonding of cardboard 
  • bondinglabels to packaging made of glass or plastic - bonding of interior footwear parts 
  • bonding paper with wood 
  • bonding of chipboard or fibreboard - bonding textiles with wood 
  • intended for use on cold presses or for manual bonding 
  • Specifications
  • Tips

Viscosity

high

pH

not causing wood discolouration

MTTF

ca. 0 [°C]

Density

approx. 1,1 g / cm3

Joint

colorless, tool non-glazing, ageing resistant

Adhesive application

It is recommended to stir the adhesive before use. It can be applied by means of spreading in a one or double side manner with the use of a brush, putty knife, feeding vessel, applicator, hand roller or machine (using nozzle or rollers).

Material safety data sheets are available exclusively at customers’ request through e-mail – fill in the form

 

© 2017 Synthos. All rights reserved.